Scaling up a painting

A large canvas transferred from a 9X12 sketch.

A large (40X30) canvas transferred from a 9X12 sketch.

Yesterday, I wrote about using a projector to scale up work. This is the more traditional way to grid, for those of you without a projector.

When working on a very large canvas in a normal-size room, I start with a smaller sketch (either in oil or graphite) and scale it up. There just isn’t enough space to stand back far enough to draw directly on the canvas.

I realize many artists are math-phobic, but there are times when an wee bit of arithmetic can save you a lot of work. I’ll try to make this painless.

The first step is to work out whether the aspect ratio of the sketch is the same as the canvas. This is the proportional relationship between height and width.

Usually I grid in Photoshop because it's faster and I can just delete the lines with a keystroke. But you can grid just as well with a pencil on your sketch.

Usually I grid in Photoshop because it’s faster and I can just delete the lines with a keystroke. But you can grid just as well with a pencil on your sketch.

Sometimes this is very obvious, such as a 9X12 sketch being the same aspect ratio as an 18X24 canvas. But sometimes, you’re starting with a peculiar little sketch drawn on the back of an envelope or something. You can use a trick you learned back in elementary school.

Remember learning that ½ was the same as 2/4? We want to make sure our sketch has the same height/width ratio as our canvas.

Thursday 3

Let’s assume that you’ve cropped your sketch to be 8” across, and you want to know how tall it should be to match your canvas.

Write out the ratios of height to width as above.

Thursday 4

To make them equivalent, you cross-multiply the two fixed numbers, and divide by the other fixed number, as below:

Thursday 5

Use your common sense here. If it doesn’t look like they should be equal, you probably made a mistake. And you can work from a known height as easily as from a known width; it doesn’t matter if the variable is on the top or the bottom, the principle is the same.

Thursday 6

The next step is to grid both the canvas and sketch. You could spend a lot of time calculating the distances, but I prefer to just divide it in quarters in each direction. I use a t-square and charcoal, and I’m not crazy about the lines being perfect; I adjust constantly as I go.

This was gridded in eighths instead of quarters because I wanted to be sure I got the water in the bottom right in the correct spot. But usually, I just divide the canvas in quarters in each direction.

This was gridded in eighths instead of quarters because I wanted to be sure I got the water in the bottom right in the correct spot. But usually, I just divide the canvas in quarters in each direction.

The last step is to transfer the little drawing, square by square to the larger canvas. I generally do this with loose paint, in raw umber. It’s time-consuming, but with big paintings it saves a lot of work in the long run.

My classes in my Rockport studio will be starting soon. Email me if you want more information. Or check here for information on my Acadia workshop.

This is a reprise of material from January, 2014.

Carol Douglas

About Carol Douglas

Carol L. Douglas is a painter who lives, works and teaches in Rockport, ME. Her annual workshop will again be held on the Schoodic Peninsula in beautiful Acadia National Park, from August 6-11, 2017. Visit www.watch-me-paint.com/ for more information.